Hello, Is anyone here doing 2 or more L2 connected sites with Cisco UCS chassis for ESX ? If so what type of addressing are you doing for the management of the chassis - which is essentially out of band type connectivity
Are you using vlans or addresses that are part of the actual vlans trunked to the UCS chassis ? [ VMs are on vlan 100-200 and the mgmt is 105, VMs are 192.168/16 and mgmt is 192.168.254/24 ] Are you using separate addresses ( VMs are on 192.168./16 and the chassis is 10.5.0.0/24 ) Same addresses / vlans per site or keeping sites separate ( mgmt at site1 is 10.5.1/24, site2 is 10.5.2/24 ) I thank you in advance and even if you may not being actually doing this if you have any opinions one way or the other that would be great too. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
