On 5/2/11 19:24 , Chris Knipe wrote: > > Given the low throughput on these WICs (Active/Passive failover), would I be > able to install two of them into the 2811, or do I need to look at an > alternative router? >
Look for an alternative router like next generation of ISR's routers. 4 HWICs slots is maximum for ISRs. Cisco 3925 have 4 EHWIC slots and two bult-in GigabitEthernet combo port, so you'll need only buy SFP, not whole HWIC-1GE-SPF. Therefor you have 4 slots free for ADSL and 2T interfaces. Performance is also higher than 2811 but also the price. If you don't need to have all HWIC's in one chassis look at 2921 which have one combo port or 2911. Regards, -- Piotr Wojciechowski (CCIE #25543) | "The trouble with being a god is http://ccieplayground.wordpress.com | that you've got no one to pray to" JID: [email protected] | -- (Terry Pratchett, Small Gods) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
