I have a 7600 with a RSP720-3CXL-GE. When pinging between the 7600 and any other device (I have tried a few) I am loosing packets - usually 5/10000 ish.

I have eventually been able to match the number of lost packets with a counter from the output of "show ibc" which from my searching of the archives "shows you the inband interface leading to the RP CPU". The counter is: Invalid pkts dropped: 306

Can anyone advise what this counter indicates? Only seems to increment with my ping traffic and not any customer traffic. I have other similar hardware but can not reproduce the issue :-(

The output

7600#show ibc
Interface information:
        Interface IBC0/0(idb 0x1C88ECE8)
        5 minute rx rate 1138000 bits/sec, 156 packets/sec
        5 minute tx rate 2305000 bits/sec, 306 packets/sec
        1529092452 packets input, 97618397184 bytes
        1480180863 broadcasts received
        1522436849 packets output, 93778000882 bytes
        15858294 broadcasts sent
        0 Bridge Packet loopback drops
        1415112685 Packets CEF Switched, 0 Packets Fast Switched
        0 Packets SLB Switched, 0 Packets CWAN Switched
        Label switched pkts dropped: 0    Pkts dropped during dma: 0
        Invalid pkts dropped: 306    Pkts dropped(not cwan consumed): 0
        Xconnect pkts processed: 29, dropped: 0
        Xconnect pkt reflection drops: 0
        Total paks copied for process level 29
        Total short paks sent in route cache 1346148563
        Total throttle drops 0    Input queue drops 0
total spd packets classified (50929199 low, 6698050 medium, 34521686 high)
        total spd packets dropped (0 low, 0 medium, 0 high)
spd prio pkts allowed in due to selective throttling (0 med, 0 high)
        IBC resets   = 1; last at xxx 2010

Driver Level Counters: (Cumulative, Zeroed only at Reset)
          Frames          Bytes
  Rx(0)   878738849       2018480538
  Rx(1)   653772091       3242895654
  Tx(0)   1522436850      1746755712

 Input Drop Frame Count
     Rx0 = 0                Rx1 = 0
 Per Queue Receive Errors:
     FRME   OFLW   BUFE   NOENP  DISCRD DISABLE BADCOUNT
 Rx0 0      0      0      0      0        0    0
 Rx1 0      0      0      0      0        0    0


  Tx Errors/State:
   One Collision Error   = 0            More Collisions       = 0
   No Encap Error        = 0            Deferred Error        = 0
   Loss Carrier Error    = 0            Late Collision Error  = 0
   Excessive Collisions  = 0            Buffer Error          = 0
   Tx Freeze Count       = 0            Tx Intrpt Serv timeout= 1

  Counters collected at Idb:
   Is input throttled    = 0            Throttle Count        = 0
   Rx Resource Errors    = 0            Input Drops           = 306
   Input Errors           = 0
   Output Drops          = 0            Giants/Runts          = 0/0
   Dma Mem Error         = 0            Input Overrun         = 0

7600#show platform hardware pfc mode
PFC operating mode : PFC3CXL

Cheers

Ivan
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to