On Tue, 2010-11-16 at 10:33 +0300, Sergey Nikitin wrote: > And once again, could anyone tell me what DFC CPU is used in the > WS-X6708-10G-3CXL? I believe that "remote command module X show version" > will show this information.
Switch#show module | incl ^ 6 6 8 CEF720 8 port 10GE with DFC WS-X6708-10GE XXXXXXXXXXX 6 001d.45ff.ffff to 001d.45ff.ffff 1.3 12.2(18r)S1 12.2(33)SXI1 Ok 6 Distributed Forwarding Card WS-F6700-DFC3C XXXXXXXXXXX 1.0 Ok 6 Pass Switch#remote command module 6 show version Cisco IOS Software, c6lc2 Software (c6lc2-SP-M), Version 12.2(33)SXI1, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Sat 28-Mar-09 10:29 by prod_rel_team ROM: System Bootstrap, Version 12.2(18r)S1, RELEASE SOFTWARE (fc1) Switch uptime is 1 week, 4 days, 2 hours, 8 minutes System returned to ROM by power-on System restarted at 07:20:58 CET Fri Nov 5 2010 Running default software cisco Catalyst 6000 (SB1121) processor with 1048576K bytes of memory. Processor board ID XXXXXXXXXXX SB1121 Processor (Rev 32) SB-1 CPU at 400Mhz, Implementation 0x401, Rev 0.3 Last reset from power-on 123K bytes of non-volatile configuration memory. 16384K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x100 Switch# -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
