Tested this on one ME3400: Upgraded to latest SW, changed my SDM and enabled IPv6 and BGP.
Cisco IOS Software, ME340x Software (ME340x-METROIPACCESSK9-M), Version 12.2(53)SE, RELEASE SOFTWARE (fc2) System image file is "flash:/me340x-metroipaccessk9-mz.122-53.SE.bin" router bgp 1 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor 10.10.10.1 remote-as 2000 neighbor 2001::1 remote-as 33 ! address-family ipv4 neighbor 10.10.10.1 activate no auto-summary no synchronization exit-address-family ! address-family ipv6 neighbor 2001::1 activate exit-address-family Jon H.Bovre ________________________________________ Fra: [email protected] [[email protected]] på vegne av Rubens Kuhl [[email protected]] Sendt: 8. mars 2010 18:35 Til: Cisco-nsp Emne: [c-nsp] ME3400 and IPv6 Cisco specs lists the following for ME3400 with METROIPACCESS feature set: IP routing: Static, RIP versions 1 and 2, EIGRP, OSPF, BGPv4, PIM-SM, and PIM-DM (metro IP access only) IPv6: MLD Snooping v1 and v2 IPv6: RIP, OSPFv3, static routes http://www.cisco.com/en/US/prod/collateral/switches/ps6568/ps6580/product_data_sheet0900aecd8034fef3.html Does this hold till now, i.e., no BGP support for IPv6 on that platform ? Thanks, Rubens _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
