Hello Tomas, > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Tomas Lynch > Sent: Thursday, March 04, 2010 1:40 PM > To: [email protected] > Subject: [c-nsp] BGP IPV6 strange message > > I'm trying to setup an IPv6 neighbor on a 7206VXR with NPE-G1 and > c7200-spservicesk9-mz.122-33.SRD4.bin. All the needed IPv6 config is > there (e.g. ipv6 cef) but BGP keeps telling me: > > 7200(config)#router bgp $ASN1 > 7200(config-router)#neigh X::X remote-as $ASN2 > % Link local peer outside address-family scope > 7200(config-router)#address-family ipv6 unicast > % BGP: Error initializing topology > > I can ping to the neighbor X::X from X::(X+1). The routers are > connected using gigabit ports. > > I have google the errors but there is nothing. Anybody else had this > problem before?
If you have a CCO account, take a look at feature navigator: www.cisco.com/go/fn A comparison of SP Services with Advanced IP Services shows numerous feature differences that you may not have expected if you came from an older train with Service Provider (-p-mz) feature set. SP Services != Service Provider Here are a few features unique to Advanced IP Services: IPv6 Routing - EIGRP Support IPv6 Routing: IS-IS Multitopology Support for IPv6 IPv6 Routing: IS-IS Support for IPv6 IPv6 Routing: Multiprotocol BGP Extensions for IPv6 IPv6 Routing: Multiprotocol BGP Link-local Address Peering IPv6 Routing: OSPF for IPv6 (OSPFv3) IPv6 Routing: RIP for IPv6 (RIPng) IPv6 Routing: Route Redistribution IPv6 Routing: Static Routing IPv6 Security: Secure Shell SSH support over IPv6 Hope that helps! Cory _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
