Łukasz Bromirski wrote:
On 2009-12-24 17:51, Joe Maimon wrote:
The original CF card may have gone bad but if you're sure the other CF
cards are OK then they may be formatted wrong.
The card is fine, tested in external reader. They are all fine.
The CF slot of NPE-G1 is very picky about CF - even if it's from
Cisco. I'd make sure I have latest ROMMON loaded and then do following:
- make the NPE-G1 boot the IOS correctly by any means - loading
it until it goes up
tftp with the boothelper, check.
- format the CF then - new ROMMONs tend to mask various 'problems'
the reader may have with the CF
Nothing seen in the disk2: or worse the router hangs.
- then check if You can reboot the router safely and it will read
the CF correctly
Nope.
If You can't make it work - RMA the NPE. Maybe the CF reader is simply
broken.
Seems like it.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
