Hi
i am search the command for NAT all traffic at destination of one IP:
My config:
Two port:
FastEthernet 1/0
Description LAN
ip address 172.16.1.254 255.255.255.0
FastEthernet 2/0
Description WAN
ip address 172.20.8.254 255.255.255.252
ip route 172.20.8.0 255.255.255.252 172.20.8.253
Actually no nat ..
I want that on the Lan interface, he answer at a new IP: 172.16.1.250
and all traffic at destination of 172.16.1.250 are sent to 172.20.8.1
If the user put in SMTP: 172.16.1.250 port 25, 172.20.8.1:25 answer
Anyone know the good command ?
thanks
jerome
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
