Hi Brian, I have never seen any event (OIR or any other kind) generated when plugging/unplugging the SFPs on any Cisco switches. The way I check this is with usual 'show int status' or simply 'show int x/y' after making the physical change.
Of course if the interface is up, then you will get normal LINEPROTO-5-UPDOWN and LINK-3-UPDOWN message provided you have the 'logging event link-status' command under interface config. This is specific to 6500 though, all other switch models log LINK UP/DOWN by default. -pavel skovajsa On Tue, Dec 15, 2009 at 3:00 AM, Brian Spade <[email protected]> wrote: > Hi, > > I am doing some testing and can't seem to get the Catalyst 6509 to log an > insertion or removal of a SFP. Is this supported? I have 'logging > buffered > 20000' configured but don't get a log when I insert/remove an SFP on a > SUP-720-3B. > > Thanks, > /bs > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
