Hi,
I am observing the problem with 48 ports 3560G in LAN infrastructure. We have
alcatel IP phone which are connected to 3560G switches. Sometimes these IP
phone are not getting power up , after restarting the switch IP phone gets
power up. As per cisco theory it's deliver average 7.7w on all 48 ports or 15.4
w on 24 ports.
i tried shut, no shut after IP phones gets power down, also tries to allocate
10-14w power on that particular interface, but no use.
What could be the issue ?
Regards,
Nilesh
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
