Drew Weaver wrote: > Hi, > > It is possible. > > We're a co-location style facility where we do not have direct > control over what the end systems do. > > I would think that a system like the 6500 should be able to handle a > little UDP traffic without losing its mind but i've been wrong about > things in the past =)
Well, mtr is a traceroute style program, and one that can be quite aggressive at that (though useful). If it's sending a lot of packets at your router which have TTL=1 when they arrive, then that's a lot of CPU punts. You didn't specify whether anything was *wrong* here; are you experiencing problems, or just counter anomalies? I take it the port-channel is in routed mode, rather than switchport? -------------- The problem is I'm seeing queue drops, so my first reaction to that was to see what kind of packets were being queued. You are correct the interface is not a switchport and has an IP assigned to it. thanks, -Drew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
