Can you determine the MSFC2 RAM size in a standby supervisor? All of the "remote command" options I've tried seem to be giving me the PFC, not MSFC2; and any typical session/console to the standby sup of course gives me the 'standby console disabled' message.
The active Sup2 was replaced awhile back and has a newer serial number, apparently part of the "factory-supplied 512Mb" series. The standby is older and not sure if it shipped with 256 or 512... Would rather not failover at the moment to find out for certain... Jeff _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
