Hello All
I've got a PA-A3-OC3 that is terminating a large number of PPPoA
connections. I need to do basic QoS/prioritization for voice traffic. I
am using a subinterface per VPI with a vc-class to reference the
virtual-template.
I have set up a parent/child policy-map as the documentation suggested
but trying to apply it doesn't work:
router(config)#int atm4/0
router(config-if)#service-policy output VOICE-PARENT
GTS : Not supported on this interface
Most of the examples I saw that did work involved one or two interfaces
of a known speed. The customers that are connecting to this vary from
256k to 30 megabits. I don't want to individually configure any portion
of the solution per customer.
I do have control of the radius configuration and can insert attributes
that contain the speed that each customer is provisioned for if that
would help.
Any ideas? Below is what I ended up with.
class-map match-all EVERYTHING
match access-group name EVERYTHING
class-map match-all IS-VOICE
match access-group name IS-VOICE
!
policy-map IS-VOICE
class IS-VOICE
priority percent 75
set dscp ef
class EVERYTHING
set dscp default
policy-map VOICE-PARENT
class class-default
shape average percent 100
service-policy IS-VOICE
!
ip access-list standard EVERYTHING
permit any
!
ip access-list extended IS-VOICE
permit ip 192.168.221.0 0.0.0.63 any
Thanks!
dave
--
Dave Weis
Internet Solver
Your Technology Partner
515-224-9229
www.internetsolver.com
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
