Hi, That's correct. The neighbors come up, flaps. Also, they did not any exchange any routes.
----- Original Message ----- From: Brad Holding To: Shine Joseph Sent: Tuesday, October 13, 2009 9:33 AM Subject: Re: [c-nsp] mGRE with VRF-Lite So when you added the 'ip nhrp map multicast 172.16.123.xxx' under the tunnel the EIGRP neighbours would just flap? On Tue, Oct 13, 2009 at 4:55 AM, Shine Joseph <[email protected]> wrote: Hi, Thanks for your responses and pointers. the vrf names in the tunnel and routing process is just an editing error. I can't get the multicasting working for the mGRE, it works well for the p2p GRE. When multicasting is used for EIGRP, the neibghors come up, but flaps and no routes are being exchanged. The Q counter is not zero. The only way, I got the mGRE worked is using neighbor statements in the routing process. See below my working config for two VRFs. Let me know if you have any further thoughts on this. Thanks Shine ------------------------------------------------------------ Router 1 ========= ip vrf data rd 100:110 ! ip vrf voice rd 100:111 ! interface Tunnel110 ip vrf forwarding data ip address 10.40.60.1 255.255.255.0 no ip redirects ip nhrp map 10.40.60.2 172.16.123.2 ip nhrp map 10.40.60.3 172.16.123.3 ip nhrp network-id 110 tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 110 ! interface Tunnel111 ip vrf forwarding voice ip address 10.40.61.1 255.255.255.0 no ip redirects ip nhrp map 10.40.61.2 172.16.123.2 ip nhrp map 10.40.61.3 172.16.123.3 ip nhrp network-id 111 tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 111 ! router eigrp 100 no auto-summary ! address-family ipv4 vrf voice network 10.40.61.1 0.0.0.0 no auto-summary autonomous-system 100 neighbor 10.40.61.2 Tunnel111 neighbor 10.40.61.3 Tunnel111 exit-address-family ! address-family ipv4 vrf data network 1.1.1.1 0.0.0.0 network 10.40.60.1 0.0.0.0 no auto-summary autonomous-system 100 neighbor 10.40.60.3 Tunnel110 neighbor 10.40.60.2 Tunnel110 exit-address-family ! Router 2 ========= ip vrf data rd 100:110 ! ip vrf voice rd 100:111 ! interface Tunnel110 ip vrf forwarding data ip address 10.40.60.2 255.255.255.0 no ip redirects ip nhrp map 10.40.60.1 172.16.123.1 ip nhrp network-id 110 tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 110 ! interface Tunnel111 ip vrf forwarding voice ip address 10.40.61.2 255.255.255.0 no ip redirects ip nhrp map 10.40.61.1 172.16.123.1 ip nhrp network-id 111 tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 111 ! router eigrp 100 no auto-summary ! address-family ipv4 vrf voice network 2.2.2.2 0.0.0.0 network 10.40.61.2 0.0.0.0 no auto-summary autonomous-system 100 neighbor 10.40.61.1 Tunnel111 exit-address-family ! address-family ipv4 vrf data network 10.40.60.2 0.0.0.0 no auto-summary autonomous-system 100 neighbor 10.40.60.1 Tunnel110 exit-address-family Router 3 ========= ip vrf data rd 100:110 ! ip vrf voice rd 100:111 ! interface Tunnel110 ip vrf forwarding data ip address 10.40.60.3 255.255.255.0 no ip redirects ip nhrp map 10.40.60.1 172.16.123.1 ip nhrp network-id 110 ip nhrp cache non-authoritative tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 110 ! interface Tunnel111 ip vrf forwarding voice ip address 10.40.61.3 255.255.255.0 no ip redirects ip nhrp map 10.40.61.1 172.16.123.1 ip nhrp network-id 111 ip nhrp cache non-authoritative tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 111 ! router eigrp 100 no auto-summary ! address-family ipv4 vrf voice network 10.40.61.3 0.0.0.0 no auto-summary autonomous-system 100 neighbor 10.40.61.1 Tunnel111 exit-address-family ! address-family ipv4 vrf data network 10.40.60.3 0.0.0.0 no auto-summary autonomous-system 100 neighbor 10.40.60.1 Tunnel110 exit-address-family ! ----- Original Message ----- From: Brad Holding To: [email protected] Sent: Monday, October 12, 2009 1:19 PM Subject: Fwd: [c-nsp] mGRE with VRF-Lite Also, the VRF names under the interfaces and the routing processes are not the same. ie. interface Tunnel110 ip vrf forwarding Data router eigrp 100 no auto-summary ! address-family ipv4 vrf Gorgon_Data Because you don't appear to have a NHRP hub, dynamic multicast mapping may not work. If it isn't, try mapping multicast traffic to each neighbour: ip nhrp map multicast 172.16.123.xxx On Mon, Oct 12, 2009 at 1:10 PM, Brad Holding <[email protected]> wrote: Hey Mate, You need to map multicast traffic dynamically under NHRP on the tunnel interface: ip nhrp map multicast dynamic This will allow the EIGRP hello's to be tunneled to the endpoints and the neighbour relationships will then establish. Brad On Mon, Oct 12, 2009 at 3:20 AM, Shine Joseph <[email protected]> wrote: Hi, I am working on a solution to run mGRE for VRF-Lite. This is my situation: there are 5 sites currently connected by MPLS IPWAn provided by ISP. I want to run VRF-Lite throughout the network for path isolation between various VLANs. VRF-Lite works great within the site (Vrf-Lite end-to-end is being deployed). In order for to cross the IPWAN, mutipoint-GRE tunnels are being looked at. tunnels are getting created, but when advertised in the VRF routing process, neighbor is not being esablished. If I use the potint to point tunnel, neighbor relationship is estanblished, working as expected. The issue will be I need to create over 50 tunnels to achieve the expected results. Can someone help me, if the mGRE with VRF-Lite is a feasible solution? Thanks in advance Shine ---------------------------- Following is a snippet of my configuration: Router 1 ======== interface Tunnel110 ip vrf forwarding Data ip address 10.40.61.1 255.255.255.224 no ip redirects ip nhrp map 10.40.61.2 172.16.123.2 ip nhrp map 10.40.61.3 172.16.123.3 ip nhrp network-id 110 ip nhrp cache non-authoritative tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 110 router eigrp 100 no auto-summary ! address-family ipv4 vrf Gorgon_Data network 10.40.61.1 0.0.0.0 no auto-summary autonomous-system 100 exit-address-family ! Router 2 ======== interface Tunnel110 ip vrf forwarding Data ip address 10.40.61.2 255.255.255.224 no ip redirects ip nhrp map 10.40.61.1 172.16.123.1 ip nhrp map 10.40.61.3 172.16.123.3 ip nhrp network-id 110 ip nhrp cache non-authoritative tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 110 router eigrp 100 no auto-summary ! address-family ipv4 vrf Gorgon_Data network 10.40.61.2 0.0.0.0 no auto-summary autonomous-system 100 exit-address-family ! Router 3 ======== interface Tunnel110 ip vrf forwarding Data ip address 10.40.61.3 255.255.255.224 no ip redirects ip nhrp map 10.40.61.1 172.16.123.1 ip nhrp map 10.40.61.2 172.16.123.2 ip nhrp network-id 110 ip nhrp cache non-authoritative tunnel source GigabitEthernet0/1 tunnel mode gre multipoint tunnel key 110 router eigrp 100 no auto-summary ! address-family ipv4 vrf Gorgon_Data network 10.40.61.3 0.0.0.0 no auto-summary autonomous-system 100 exit-address-family _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
