Hi. I seem to be going mad. This is supposed to work, right? I'm trying to get a policy-map to mark EXP5 for all traffic coming from a vlan.
mls qos policy-map TEST class class-default set mpls exp impo 5 int vlan123 descr to-CE service-policy input TEST The counters aren't increasing: PE#show policy-map interface Vlan123 Service-policy input: TEST class-map: class-default (match-any) Match: any set mpls experimental 5: Earl in slot 5 : 0 bytes 30 second offered rate 0 bps aggregate-forwarded 0 bytes And a traceroute from the CE through PE shows that EXP is 0 for every hop. And yes, this is where the traffic goes. Setting the policy-map in the outgoing direction does increase the counters, but that doesn't help much. I also tried a policer with conform-action set mpls exp transmit, same results. No trust (cos or dscp) configured anywhere. "mls qos mpls trust experimental" is on by default and not disabled. What could be wrong? Sup: RSP720-3CXL CE attached to: WS-X6748-GE-TX IOS: 12.2(33)SRB1 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
