So as long as your router is correctly mapping the IP PREC to the COS (802.1P field), it sounds like it might help. These are 802.1Q tagged packets on the wireless, right?
Chuck -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jon Simola Sent: Wednesday, September 23, 2009 1:13 PM To: Rens Cc: [email protected] Subject: Re: [c-nsp] ospf hellos On Wed, Sep 23, 2009 at 7:35 AM, Rens <[email protected]> wrote: > Is there a way to prioritize ospf hello packets with 802.1p? They are by default. See http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a0080094612.shtml "Cisco IOS assigns an IP precedence of 6 to routing protocol packets on the control plane. As noted by RFC 791, "The Internetwork Control designation is intended for use by gateway control originators only." Specifically, Cisco IOS marks these IP-based control packets: Open Shortest Path First (OSPF), Routing Information Protocol (RIP), Enhanced Interior Gateway Routing Protocol (EIGRP) hellos, and keepalives. Telnet packets to and from the router also receive an IP precedence value of 6. The assigned value remains with the packets when the output interface transmits them into the network." -- Jon _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
