> Hank, > > This is available on the 6500/7600 through microflow policers: > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con > figuration/guide/qos.html#wp1571584
Did I fail to mention that the router is much smaller? :-) -Hank > > Arie > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Hank Nussbacher > Sent: Wednesday, September 23, 2009 08:48 > To: [email protected] > Subject: [c-nsp] Limiting b/w per IP? > > I haven't followed all the new bells and whistles in IOS so maybe > something new is there that can handle this age old problem for me. > > I want to be able to rate limit all IPs so that no single IP on an > interface can eat more than say 20% of the available b/w (inbound and > outbound). I do not want to define every single IP of the segment in an > > ACL but can if the solution is clean. Not interested in protocol > rate-control - just IP b/w. > > Cisco snippets or URLs welcome. > > Thanks, > Hank > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
