I opened a TAC case and they confirmed after research with a DE that the "carrier-delay msec 100" interface command is configurable, but it doesn't do anything. If your 4500 linecards don't have support for the port debounce capability then your out of luck. Clinton.
Clinton Work wrote:
I'm trying to figure out of the Catalyst 4500s running Sup5 with IOS 12.2SG support the carrier-delay command. The interface capabilities show that the old Catalyst link debounce feature isn't supported on WS-X4306 GigE interfaces , however the switch allows you to configure carrier-delay. For example:
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
