I think there is some serious problems with BVIs and IPv6. // Olof
On Wed, Sep 9, 2009 at 5:53 PM, Joe Abley <[email protected]> wrote: > > On 2009-09-09, at 04:56, Bjørn Mork wrote: > >> Joe Abley <[email protected]> writes: >> >>> interface FastEthernet0/1 >>> description facing the exchange point >>> bridge-group 1 >>> bridge-group 1 output-pattern-list 1100 >> >> And this access list does allow e.g. IPv6 multicast frames? > > That access list is just cleaning frames being sent to the exchange to make > sure that weird crap doesn't leak over there. The exchange point in question > only permits one nominated MAC per port, and will shut down the port > automagically if it hears more. > > access-list 1100 permit 0023.9c72.d700 0000.0000.0000 0000.0000.0000 > ffff.ffff.ffff > > That's the complete list, as configured. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
