On Wednesday 02 September 2009 03:04:55 pm Tony wrote: > One thing that I've just discovered that puzzles me is > that the OSPF neighbour drops are only on ONE of the > links that come into this 7204. It has neighbours on the > interfaces Fa0/0.3, Atm1/0.2 & Atm1/0..3. It is only the > neighbour on the Fa0/0.3 interface that is dropping, the > two connected via ATM are not dropping at all. Is there > any logical reason for this ? Is it because I'm using the > 10/100 port on the I/O module ? Would it be any different > if the ethernet interface was on a PA instead ?
Not sure if anyone answered this. Check the hello timers for the interfaces. As I recall, ethernet interfaces default to a shorter hello/dead interval than do ATM/frame relay/etc. Longer timer intervals on your ATM interfaces could account for their neighbor relationships being more resilient in the face of adversity. Brian _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
