On Wed, 2 Sep 2009, James Berwick wrote:
works fine. Pinging a customer on our OC3 with any packet larger than 576
bytes intermittently fails.
This is the ATM OC3 config:
interface ATM1/1/0
mac-address 0000.0c71.1148
bandwidth 155000
no ip address
load-interval 30
atm ilmi-keepalive
end
First thing I'd try here would be to configure some ubr value on the OC3,
set it to 120 megabit/s or something like that. If that helps, increase
until you get close to wirespeed and see if the problem creeps up the
higher the UBR. The behaviour you're seeing is alike to what I've seen
when there is a cell policer dropping cells somewhere.
--
Mikael Abrahamsson email: [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
