At 12:28 PM 7/3/2009, Aaron wrote:
You must be using something else besides BGP. You need static, RIP,
IGRP, EIGRP, ISIS, or OSPF to get your routes into the table. BGP
cannot do it alone.
True. It was late/early when I read that and replied. :) We use ISIS
to carry router loopback addresses and links and BGP for everything
else. We do run BFD for ISIS. BGP runs on top of that. Nevermind.
-Robert
On Fri, Jul 3, 2009 at 05:28, Robert Boyle
<<mailto:[email protected]>[email protected]> wrote:
At 02:55 AM 7/3/2009, Ian Henderson wrote:
Nick 'tarantul' Novikov wrote on 2009-07-03:
> The question arises, why IOS XR can't run BFD with internal BGP peers
> (as old school IOS)?
Because its assumed you're already using an IGP with which you can use it?
What about those of us who use BGP as our IGP? I'm sure that
customer pressure will eventually lead Cisco to put that back into
the code. We use BFD and BGP internally and (obviously) BGP externally.
-R
Tellurian Networks - A Perot Systems Company
<http://www.tellurian.com>http://www.tellurian.com | 888-TELLURIAN |
973-300-9211
"Well done is better than well said." - Benjamin Franklin
_______________________________________________
cisco-nsp mailing
list <mailto:[email protected]>[email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
<http://puck.nether.net/pipermail/cisco-nsp/>http://puck.nether.net/pipermail/cisco-nsp/
Tellurian Networks - A Perot Systems Company
http://www.tellurian.com | 888-TELLURIAN | 973-300-9211
"Well done is better than well said." - Benjamin Franklin
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
