r u running NAT on ths box, if yes; NVI, usually used for NATing out of VFRs.
Regards, Masood Blog: http://weblogs.com.pk/jahil/ > Hello, > > I have never seen interface named NVI0. What is this NVI0? > > router#sh ip interface brief > Interface IP-Address OK? Method > Status Protocol > GigabitEthernet0/0 x.x.x.x YES NVRAM up up > GigabitEthernet0/0.1 x.x.x.x YES NVRAM up up > GigabitEthernet0/0.2 x.x.x.x YES NVRAM up up > GigabitEthernet0/1 x.x.x.x YES NVRAM up up > FastEthernet0/0/0 unassigned YES unset > up down > FastEthernet0/0/1 unassigned YES unset > up down > FastEthernet0/0/2 unassigned YES unset > up down > FastEthernet0/0/3 unassigned YES unset > up down > Vlan1 unassigned YES NVRAM > up down > *NVI0 unassigned NO unset > up up* > Virtual-Access1 unassigned YES unset > down down > > Sincerely, > Tseveen. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
