Hey guys,
Just a quick one I am interested to know why an ACL I have applied to a
VLAN is not showing counters for a particular line in the access-list
that I know is denying packets. See below for example
Extended IP access list virus-traffic
10 deny ip host 10.x.x.x 10.y.y.y.y 0.0.255.255
20 permit ip any any (167199 matches)
The permit ip any any shows matches as normal. What am I missing here?
Cheers,
Aaron.
LEGAL DISCLAIMER: This message contains confidential information and is
intended only for the individual named. If you are not the named addressee you
should not disseminate, distribute or copy this e-mail. Please notify the
sender immediately by e-mail if you have received this e-mail by mistake and
delete this e-mail from your system. If you are not the intended recipient you
are notified that disclosing, copying, distributing or taking any action in
reliance on the contents of this information is strictly prohibited.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
