Nope. No filtering at all on the entire path for this customer. On Thu, Jun 25, 2009 at 11:28 PM, <[email protected]> wrote:
> Todd, any egress filtering to the customer in place that is different from > your other configs? > Richard > ------Original Message------ > From: Todd Shipway > Sender: [email protected] > To: [email protected] > Subject: [c-nsp] Can't ping outside network over T1 > Sent: Jun 25, 2009 9:51 PM > > I've got a weird issue that I can't seem to solve. > Overview. Network is running on a core router which is a 7513 with > channelized DS3's split into ds1's to customers. I have one customer who > has 2 T1's bonded using multilink ppp. I can ping everything on our > network, including other customers. But nothing is making it out of our > network to our peers. I've moved the t1 to multiple cards and interfaces. > Separating the T1's works fine, but multilink kills the public routing > side > of it, even when the source IP is a public address that routes fine on a > single interface. > > Any ideas what may cause something like this? I've got a ton of other > customers setup with this identical hardware and configuration working > fine. > I've also swapped out hardware at the remote end as well. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > Sent via BlackBerry from T-Mobile _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
