We're monitoring the traffic of service instances (under SRD2) just like the traffic of
subinterfaces, ifInOctets/ifOutOctets, etc (in the latest IF-MIB, service instances are
represented as subinterfaces and associated with an ifIndex).
No issues so far, except that we can't configure the bandwidth of service instances
through the cli.
--
Tassos
????? ????????? wrote on 23/06/2009 16:29:
Hello List!
In our MPLS network we are planning to deploy "scalable EoMPLS" instead of "EoMPLS based on PFC (subinterfaces)".
For example, we had:
interface gigabitethernet <ID>.subint
encapsulation dot1q <vlanID>
xconnect <remote loopback> <VC ID> encapsulation mpls
and we want to deploy:
interface gigabitethernet <ID>.
service instance <ID> ethernet
encapsulation dot1q <vlanID>
rewrite ingress tag pop 1 symmetric
xconnect <remote loopback> <VC ID> encapsulation mpls
The main platform - 7600 (RSP720), IOS 12.2(33)SRC4.
Currently, there is no CISCO-EVC-MIB support for this IOS, and we have no
opportunity to test other IOS (SRD, for example) on production network.
So, the question: does anyone have already tried to monitor the traffic load
via these MIB (CISCO-EVC-MIB )? Or maybe there are other ways?
Best regards,
Olga
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
Tassos
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
