Hi All, Got a problem with a site-to-site IPSEC vpn implementation where one end is using SVI. Does any body know if a crypto map can be applied to a SVI to bring up the IPSEC tunnel? It accepts the command but I can't pass any traffic to/from it. interface vlan 10 crypto map MY-MAP Or do you need to apply the crypto map to a physical interface? I've gotten it working on a sub-interface (eg: interface GigabitEthernet0/0.11) but can't find any documentation that talks about applying it to a SVI and whether this will work. Thanks. Andy
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the organisation. Finally, the recipient should check this email and any attachments for the presence of viruses. The organisation accepts no liability for any damage caused by any virus transmitted by this email. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
