Ryan - Solved... for now at least...
Still using straight thru cable for synch interface I upgraded to 8.21 - based on the following bug IDs: CSCsu88174 CSCsw98373 CSCsy21727 CSCsz63217 For the record the sh run | inc fail: failover lan unit primary failover lan interface failover Ethernet0/3 failover link failover Ethernet0/3 failover interface ip failover 172.20.20.6 255.255.255.0 standby 172.20.20.7 and failover lan unit secondary failover lan interface failover Ethernet0/3 failover link failover Ethernet0/3 failover interface ip failover 172.20.20.6 255.255.255.0 standby 172.20.20.7 Thanks again, -Jeff -----Original Message----- From: Ryan West [mailto:[email protected]] Sent: Thursday, June 11, 2009 4:17 PM To: Jeff Wojciechowski Cc: [email protected] Subject: RE: ASA 5510 Configuration Replication Failure Have you tried a crossover? Can you post 'show run failover' ? A console on the standby firewall might reveal something during the replication process too. -ryan <snipped> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
