It's not cheap, but Xangati may be a good match. Frank
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andy Dills Sent: Tuesday, June 02, 2009 2:21 PM To: [email protected] Subject: [c-nsp] Netflow analyzer suggestions Hi there, Apologies for the non-cisco specific post, but I couldn't think of a better list to post to off of the top of my head. A friend of mine is looking to get some better visibility into their network usage (low bandwidth, T1 type scenario). I got them setup with an IOS that supports netflow v9, and since they had a freebsd box being barely used, I built ntop to be their collector/analyzer. It works reasonably well, but it's perhaps not quite...user friendly enough for them. What they're looking for is a graphical representation at the host level. In essence, they're looking for something like cricket/mrtg but with each IP having its own graph (rather than each interface). Additional features, such as protocol breakdown and so forth are helpful, but the primary desire is to be able to see how much bandwidth a given IP address is using currently and was using in the past. They're open to commercial solutions, but would prefer to keep costs down. Host operating system requirements for the collector/analyzer aren't important. Does anybody have any suggestions they could pass along? Thanks, Andy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 --- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
