Hi, I have been gradually rolling out OSPF across a network including the following bit of config:
router ospf 172 ispf timers throttle lsa all 10 100 5000 timers lsa arrival 80 Which was fine until I arrived at a couple of 6506s with SUP2/MSFC2 running 12.2(17d)SXB9 which don't support those commands. Seems they were only introduced in 12.2(18)SXF according to Software Advisor. We can't upgrade to 12.2(18)SXF due to a lack of memory on the switch processors. I'm not too worried by the "ispf" business, but I have a bad feeling about having a couple of devices different from their neighbours with the LSA stuff. To really up the nerves, these 6506s are are part of the core. I can imagine it working well most of the time but then failing badly when the pressure is on. So I guess my questions are: - Am I right to be worried, or will things work fine if I miss these commands from these devices? - Since these timers can only be set on a per device basis, as opposed to per interface, is there an elegant way to deal with this scenario? Obviously I would not be keen to remove the modified timers from the rest of the network! Thanks, Ray _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
