Tim, You should definitely be able to remove the no-export well know community using an inbound route-map but you will not be able to do it outbound on an eBGP session as the path will not even be considered for advertisement in the latter case.
Regards -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tim Durack Sent: Wednesday, March 25, 2009 1:07 PM To: [email protected] Subject: [c-nsp] match and remove no-export This is probably a stupid question, but anyway: Can I match and remove no-export from routes? I need to shuffle some routes between global and a vrf. I have a "fake" eBGP session up, but the routes I need to move are marked no-export. I've tried applying a simple match/set route-map to the eBGP session, without success. I'm going to assume no-export gets taken into account before the routes even hit the route-map. Any ideas? Tim:> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
