> Dan, you identified the problem for me. I had the radio in TNC PKT mode, > looked up in the manual how to take it out of that mode and Chirp promptly > populated. It did click my Flex PTT, but as you said, that was momentary > with no ill effect. I was already using the cable I got from BlueMax49ers > made for the TM-D700 so I was fairly sure it was terminated properly for > that radio. I'd even talked by phone with Mark there, who told me about > having to use the legacy Chirp for this radio and that's what's working for > me.
Okay, very glad you got it working, and glad your cable is intended for the D700 itself. That makes things easier. I definitely disagree about the recommendation for legacy though - "next" has a ton of fixes for this driver, among others. It might have other bugs, but I'll gladly fix them if you report them as I own this radio and want it to work. Legacy will get no further fixes *and* has known bugs that can cause real problems, so I do not recommend it for anything other than the most dire of circumstances at this point. --Dan _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
