On Wed, Feb 28, 2024 at 9:27 AM Massimo Nespolo <massimo.nesp...@orange.fr> wrote: > > Greetings from France. > > When I first got my UV-5R, the channel programming with CHIRP was > performed by a friend, who locked the menu button to prevent a beginner > like me to make any mistake which could have screwed the programming. > > Now I would like to unlock the menu, but I cannot figure out how to do > it. I did quite a lot of internet research, but I could only find > duplicate tutorials on how to lock the pad with the key button. That > is not what I am looking for, of course. The menu button is > unresponsive, I would like to unlock it. > > Thank you in advance for your help.
Just for clarification, unless you have one of the radios that can disable the user from accessing VFO (frequency) mode, such as the F11, UV-82C or UV-82HP, and the the menus were disabled with the radio in MR (channel) node, then there is no way to prevent the radio's user from accessing any of the menus. They are only disabled while the radio is in MR mode. All that needs to be done to access any menu is to switch to VFO mode (where all menus are always accessible no matter if they have been "disabled", or not). To enable the settings that disable the "RESET Menu" setting and the "All Menus" setting using CHIRP you tick the following settings. Settings -> Advanced Settings -> RESET Menu Settings -> Advanced Settings -> All Menus Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
