Thanks, Dan. That didn't work either. You mean 56h (hex) or 0x56, right?
When downloading from the radio, the channel numbers appear highlighted in red with an exclamation point ahead of each one, presumably denoting an error. Nothing appears in the rest of the spreadsheet. I did notice that the error indications showed up a lot faster when the address is set to 0x56 than when set at 0x66, so at least there is some indication that changing the address had some effect. Rick WA1RKT On 2/23/24 1:09 PM, Dan Smith via chirp_users wrote: >> I did verify that CI-V is turned on in the radio and the address is set >> to 0x66. (Speaking of which, how do I set the address in Chirp? Maybe >> that's the problem...) > You can't change the CI-V address in CHIRP, you'll have to set it in the > radio. The CHIRP driver expects the 746 to be at address 56, so I would give > that a try. > > --Dan > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rick WA1RKT at wa1...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-ow...@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
