On Mon, Jan 15, 2024 at 6:28 PM Roland Welte <roland.we...@bluewin.ch> wrote: > > Hi Jim KC9HI > > Thanks so much for your help. > > I loaded test module 11046 and I ran an initial test with my 5RX radio. So > far so good. I could enter airband frequencies and upload them to the radio. > What does not work is entering frequencies from the FM radio band (65-108 > MHz). This results in an "Invalid Entry" error message. I have attached a > debug report. > > Thanks again, > Roland
You should provide feedback and reports on the ticket. What you describe is not a bug. You cannot enter broadcast FM frequencies (65-108 MHz) into the spreadsheet editor. The broadcast FM feature is on a separate chip. It only stores 1 frequency. On many new radios, including this one, the selected frequency is not exposed to CHIRP. This means CHIRP can't read the frequency that the radio has selected and CHIRP cannot set the frequency in the radio. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
