Column 1 , CTCSS or DCS Column 2, Tx Encoding Column 3, Rx Decoding In all my 30 years of PMR and amateur programming, I have only ever come across one system which did not use a different tone for Tx and Rx, let alone one which uses a combination of CTCSS / DCS for Tx and Rx. DCS is frankly not very good, which is why it was not widely used in the commercial world. It is prone to false triggering. DCS polarity is merely a numerical compliment and again, negative values are never used in practice.
On Thu, 12 Oct 2023 at 19:42, Tony Ling <[email protected]> wrote: > Your correct setting should be > Tone Mode = TSQL - this sets CTCSS encode and decode. > Tone = 131.8 > > To my mind, I find CHIRP's CTCSS/DCS configuration very clumsy. > It takes up file columns to describe a very simple concept which could > easily be covered in three columns. > > On Thu, 12 Oct 2023 at 19:34, K0LNY ?? <[email protected]> wrote: > >> Hi, >> My local repeater uses 131.8 for a PL tone. >> I at one point had 88.5 in one place and 131.8 in the other. >> So I changed both to 131.8, and it seems that it should still work, but >> it isn't keying the repeater. >> I'm guessing the R in r-tone is for repeater, and the C in C-tone is >> CTCSS? >> Anyway, which one of these is the repeater wanting to hear to open up? >> Thanks. >> >> Glenn >> A man with a clock always knows what time it is. >> A man with two clocks is never sure. >> -- A derivative of Segal's law >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Tony Ling at [email protected] >> To unsubscribe, send an email to >> [email protected] >> To report this email as off-topic, please email >> [email protected] >> Searchable archive: >> https://www.mail-archive.com/[email protected] > >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
