On Sun, Jul 30, 2023 at 3:55 PM Ken Hansen <k...@n2vip.org> wrote:
>
> Hello all,
>
> I programmed my GT-5R with CHIRP-Next and all was fine, except when I tried
> to program a simplex channel in my radio to access my SHARI AllstarLink node.
>
> In the memory tab, I set "Duplex" to "off", as the logical choice among "+",
> "-", "split", and "off". But when I tried to transmit after loading that
> channel into my radio, it would not transmit (no RF, display color didn't
> change).
It is working as expected. Duplex: 'off' is TX disabled (not simplex,
not +, not -, not split)
Duplex: '(none)' or '{blank}' is TX freq = RX freq (aka simplex) #
CHIRP-legacy or CHIRP-next respectively
>
> So I went in, looked hard at the settings, and discovered there was another
> option lurking in plain sight - " " (blank).
>
> When I selected (blank) and loaded the radio with the modified channel, it
> worked fine (TX as expected, in simplex).
>
> If I look at the (actually pretty good) GT-5R manual that shipped with the
> radio, it says I have three choices for that field, menu item 25, SFT-D:
>
> "OFF [0]" TX = RX (simplex)
> "+ [1]" TX higher than RX freq
> "- [2]" TX lower than RX freq
>
> There's no mention of "split" or "off".
This is menu 25 (SFT-D) in the radio. It is only applicable when the
radio is in VFO mode and has no direct correlation to the Duplex
setting in CHIRP
>
> In short, the only valid options appear to be "-", "+", and "off", which I
> guess could be set to " " (blanks).
Again, this setting has nothing to do with channels in MR mode and no
direct relationship to the Duplex setting in CHIRP.
>
> I just thought I'd share this here, I'll open an issue on the chirp-next
> website to get this fixed.
Don't open and issue. Nothing is broken so there is nothing to fix.
>
> Ken, N2VIP
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to arch...@mail-archive.com at arch...@mail-archive.com
To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
To report this email as off-topic, please email
chirp_users-ow...@intrepid.danplanet.com
Searchable archive:
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
