Probably not the correct device driver for your cable or the wrong com port (assuming you're using Windows... you didn't say)
> On 03/03/2023 14:07 EST Jim Overstreet <w...@cox.net> wrote: > > > I have tried everything in the instructions and cannot get > Chirp to communicate with the radio. As per the instructions, you > turn the radio off, connect the USB cable, then turn on the radio while > holding down the F/W key which puts the radio in CLONE mode which > shows on the display. Then, you hit the band key and it tries to communicate > with the radio. At first, it looks like it will work but after about 20 > seconds > ERROR appears in the display. I followed the instructions just as shown > when you start the process, but always get the ERROR message. Just > wondering if anyone has had success with the VX-3? WHat am I doing wrong? > > Thanks, > Jim, WA5DXP > > > _______________________________________________ chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was > sent to Nigel Gunn, W8IFF at ni...@ngunn.net To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com To report this email as > off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable > archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail ni...@ngunn.net www http://www.ngunn.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
