>> I was using a tidradio bluetooth programming adaptor and after programming >> the scan feature stopped working and the programmed channels wouldn't >> program and a lot of other issues that I assume come with a bricked radio. I >> tried resetting both radios from the menu but it didn't help. I'm assuming >> the firmware is messed up somehow. >> >> UV82HP - >> Hold down #3 and power on- US2S35 >> Hold down #6 & power on- 150602N >> BF-F8HP - >> Hold down #3 and power on- F8HP-1 >> Hold down #6 & power on6- 160102 >> >> I'm not sure if there's a way to do a hard reset in chirp to get everything >> back to factory settings or if I have to do something with the firmware? Any >> help would be appreciated. I'm better at seeing how it's done on video >> rather than following steps but anything is worth a try right now. >> >> Thanks, Jeff > > They are not "bricked". Email me directly and I will help you to get > them working again.
It's also worth pointing out that chirp does not upload or modify firmware in *any* radio and thus can't "mess up" the firmware. It's possible for chirp to upload some *memory data* that the firmware running in the radio can't understand, and some low-quality radios are not very robust about error checking or handling unexpected data if that were to happen, but that can usually (read: almost always) be corrected. --Dan _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
