Some have experienced difficulty loading the Latest Daily Build. (20221108). If this occurs, I recommend reverting back to the prior release. (20221025) https://trac.chirp.danplanet.com/chirp_daily/daily-20221025/
An updated release is planned for tomorrow. > On Nov 8, 2022, at 4:00 AM, Lynda Leung <x-ro...@mermaid.org> wrote: > > Looks like the new build has a bit a problem starting on MacOS. > > Dump: > > /Volumes/Applications/incoming/CHIRP.app/Contents/MacOS/chirp ; exit; > Traceback (most recent call last): > File > "/Volumes/Applications/CHIRP.app/Contents/MacOS/../Resources/chirp/chirpw", > line 24, in <module> > from chirp.drivers import * > File > "/Volumes/Applications/CHIRP.app/Contents/Resources/chirp/chirp/drivers/hg_uv98.py", > line 23, in <module> > from builtins import bytes > ImportError: No module named builtins > > > >> On Nov 8, 2022, at 12:07 AM, Build System <donotre...@chirp.danplanet.com> >> wrote: >> >> Greetings, >> >> A new daily build of CHIRP is available. This includes changes made >> directly to the tree yesterday, and may include additional features, >> bug fixes, and/or bugs. If you are interested in trying it, grab it >> from the following location: >> >> http://trac.chirp.danplanet.com/chirp_daily/daily-20221108 >> >> >> A list of the changes included in this build (since the last daily) >> follows: >> >> Changes for Build #708 >> [Dan Smith <dsm...@danplanet.com>] Fix ICF-based radios for clone out >> >> At some point we apparently started slamming data down the serial >> line at too high a rate for older radios. When using an ID-800, >> the clone dialog finishes in a few seconds, and the radio times out >> because it missed a huge chunk of the image because it overran its >> buffer. This seemed to work okay for radios that use the direct >> serial connection to the 2.5mm data jack, but not via the OPC-478 >> type interface. >> >> This change makes us read our own echo frames before sending the >> next one, which slows us down a lot. It feels a lot slower, >> but it means we're at least pacing the physical echo. >> >> Tested with an ID-800, ID-880 and IC-2820 and this fixes things. >> >> [Masen Furer <m_git...@0x26.net>] add Lanchonlh HG-UV98 driver (#100) >> >> * hg_uv98: add Lanchonlh HG-UV98 driver >> >> fixes #7999 >> >> [Dan Smith <dsm...@danplanet.com>] py3-pr needs to push *after* matrix commit >> >> [Dan Smith <dsm...@danplanet.com>] py3-pr Needs file to commit >> >> [Dan Smith <dsm...@danplanet.com>] Update py3-pr to have tox for >> makesupported >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Lynda Leung at x-ro...@mermaid.org >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> To report this email as off-topic, please email >> chirp_users-ow...@intrepid.danplanet.com >> Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John LaMartina at joh...@usa.net > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-ow...@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
