I wonder how much different the format is on the ID 5100 from the 7100. Sure would like to have Chirp working on the 5100.
I am still willing to loan the radio to someone who could work on the code for the 5100... On Wed, Jul 27, 2022 at 10:48 AM Martin Cooper <mfncoo...@gmail.com> wrote: > Assuming it's the same as for the IC-910H, the CI-V Transceive function is > like a real-time updating facility, whereby when you tune the radio > manually, it continually sends CI-V data to the computer. You do not want > this enabled while running Chirp. FLRIG quite likely does want this > enabled, so this may be the setting that Jim was referring to. > > The Chirp driver for the IC-7100 is a live mode driver. As such, Chirp > uses the CI-V interface to talk to, and receive data from, the radio. I > don't know about the connectors on that radio, but make sure you're > connecting to the CI-V interface. > > Martin. > KD6YAM > > On Wed, Jul 27, 2022 at 3:03 AM Tony Ling <tonyg7...@gmail.com> wrote: > >> CI-V Transceive OFF or ON Turns the CI-V Transceive function ON or OFF >> Clone Clone Mode Reads or writes the CS-7100 data to or from the PC, >> and/or receives data from a Master transceiver >> >> On Wed, 27 Jul 2022 at 10:55, Tony Ling <tonyg7...@gmail.com> wrote: >> >>> Two COM port numbers are assigned to the [USB] connector. One of them is >>> “USB1,” used for cloning and CI-V operation. The other one is “USB2,” whose >>> function is selected in “USB2 Function” item of the “Connectors” Set mode. >>> (p. 6-8) >>> >>> On Wed, 27 Jul 2022 at 02:58, Jim Unroe <rock.un...@gmail.com> wrote: >>> >>>> On Tue, Jul 26, 2022 at 4:04 PM Michael Nadler KI7QIB >>>> <michael.nad...@gmail.com> wrote: >>>> > >>>> > ICOM 7100 connected to Linux system via the mini-USB port. FLRIG can >>>> control the radio through that interface. >>>> > >>>> > Running CHIRP 0.3.0dev, when I try to download from the radio via >>>> /dev/ttyUSB0, I get a pop-up error message: unicode strings are not >>>> supported, please encode to bytes: <<gibberish characters>>>". >>>> > >>>> > Are there specific settings I need to have set on the ICOM? >>>> > >>>> > Is CHIRP able to interact with the ICOM-7100 via the mini-USB port? >>>> Do I have to use the RT-Systems FTDI cable into the audio port? >>>> > >>>> > >>>> > P.S. I also tried running Windows CHIRP daily-20220408. Download >>>> from radio gets "error" in every entry. >>>> > >>>> > >>>> > -- >>>> > Michael Nadler >>>> > KI7QIB >>>> >>>> I know that when I used CHIRP on my IC-7300, I used a different cable >>>> than I did when I used FLRIG. I also had to edit a setting in the >>>> radio for CHIRP and change it back for FLRIG. >>>> >>>> Jim KC9HI >>>> _______________________________________________ >>>> chirp_users mailing list >>>> chirp_users@intrepid.danplanet.com >>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>> This message was sent to Tony Ling at tonyg7...@gmail.com >>>> To unsubscribe, send an email to >>>> chirp_users-unsubscr...@intrepid.danplanet.com >>>> To report this email as off-topic, please email >>>> chirp_users-ow...@intrepid.danplanet.com >>>> Searchable archive: >>>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>>> >>> _______________________________________________ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Martin Cooper at mfncoo...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> To report this email as off-topic, please email >> chirp_users-ow...@intrepid.danplanet.com >> Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Chuck Hast at kp4...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > To report this email as off-topic, please email > chirp_users-ow...@intrepid.danplanet.com > Searchable archive: > https://www.mail-archive.com/chirp_users@intrepid.danplanet.com -- Chuck -- KP4DJT HamHotline # 11259
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-ow...@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
