Thanks Jim On Wed, 25 Aug 2021, 13:54 Jim Unroe, <rock.un...@gmail.com> wrote:
> Hi George, > > On Wed, Aug 25, 2021 at 3:20 AM George Piek <georgepi...@gmail.com> wrote: > > > > Good day, I am trying to programm my UV5R but when I select upload to > radio I have the small notification block which request the following. > > Port > > Vendor > > Model. > > I can select the port but it will not allow me to change vendor or > model. What should i do? > > > > This is because you are uploading. When you are uploading, CHIRP > already knows what Vendor/Model that currently selected tab is > compatible with. It is only that vendor/model combination that the > selected tab can be uploaded to so the Vendor: and Model: selections > are greyed out. > > If the currently selected Vendor: and Model: selections do not match > the radio type that you are attempting to upload to, then the > currently selected tab is not compatible with your radio and should > not be uploaded to it. > > You must always start by downloading from CHIRP to create a tab that > is compatible with your radio. From there you can save, load and edit > to suit your needs. Then when you go to upload back to your radio > there will be no need to change the Vendor: or Model: selections > because they are already set to the vendor/model selections that are > compatible with your radio. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to George Piek at georgepi...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com >
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
