Use Device Manager to see what comm port you are connected to. Unplug and plug back in your cable, the one you are using will disappear and come back. Next, check the driver and cable model name. If it shows you are using a Prolific cable, roll back your driver to 3.2.0.0.
When you are going thru the clone process, always read the radio first, modify your file, then write to the radio. When the instructions says to push the Set button, it is the fastest push you can do and release, don’t press too long. Jardy Dawson WA7JRD Message sent by....Oh look!! Pretty lights!! > On Sep 7, 2020, at 14:41, D.J.J. Ring, Jr. <n...@arrl.net> wrote: > > > You have to select the USB port that your radio is connected to. > > 73 > > DR > >> On Mon, Sep 7, 2020 at 5:28 PM joe <j...@joeshapley.com> wrote: >> Hi everyone, >> >> Windows 10 computer >> >> I am trying to clone the Yaesu FT8900R (this is the first time) >> >> I use CHIRP and I follow the CHIRP instructions (same as in Yaesu manual) >> >> I turn on the radio, go to F6 "clone start", then push "set" >> >> Nothing happens...after a few seconds, I get error message stating it could >> not find the item location (com port). Tried several times on all four >> active ports. >> >> Checked "device manager" and the four ports are active and well >> >> Any help or suggestions will be greatly appreciated >> >> Joe >> _______________________________________________ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to D.J.J. Ring, Jr. at n...@arrl.net >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jard...@yahoo.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
