Yeah, had the same issue... try all com ports until one works. Make sure you push the plug into your HT real hard... it sometimes takes some force.
On Sat, Feb 1, 2020 at 3:02 PM John La <joh...@usa.net> wrote: > Here is a list of error messages and solutions that may assist. > > www.Miklor.com/COM/UV_ErrorMess.php > > John K3NXU > > -----Original Message----- > From: chirp_users-boun...@intrepid.danplanet.com [mailto: > chirp_users-boun...@intrepid.danplanet.com] On Behalf Of Mark Ross > Sent: Saturday, February 1, 2020 11:02 AM > To: chirp_users@intrepid.danplanet.com > Subject: [chirp_users] Error-radio did not respond > > I am a first time user. UV 5r. Can’t upload from radio. Error message > comes up radio did not respond. I put in Com3 as it shows, model is correct > as well as vendor. Any ideas are appreciated > > Thank you so much! > > Mark Ross > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John LaMartina at joh...@usa.net > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to JOHN at jump...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com -- John Dodd Chesapeake Bay
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
