See if this helps. https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns#Tone-Mode
If you want encode and decode both with the same tone the program the channel like location #4 in this example. https://wiki.radioreference.com/images/0/0a/CHIRP_tone_programming.pdf Tom ND5Y On 1/11/20 6:03 PM, Nita S. wrote: > I am new to Chirp. My radio, a Jetstream JT-270MH, has the capability of > specifying both a tone encode (for keying a repeater) and a tone decode > (for validating that transmissions received) are from the correct > repeater. I had manually entered these into the radio, and it was > working correctly. > > Then I introduced Chirp into the picture. Chirp has columns for both > Tone and ToneSql. I have been unable to get the correct tone to show in > both columns. Generally, I see a value in the Tone column combined with > 'Tone' in the Tone Mode column. Alternatively, I see a value in the > ToneSql column and 'TSQL' in the Tone Mode column. > > Is this the correct display, and if so which one tells me that Chirp is > programming the tone for transmissions in both directions ? > > Note that I can open the memory line in a Properties window, set both > Tone and ToneSql to the same value, but they do not stick when clicking OK. > > Also note that I have opened bug # 7475 concerning the precise radio > profile used to clone this data, and issues encountered, so there could > be a connection, but seems unlikely to me. _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
