I'm using Windows 10 On Wed, May 15, 2019, 5:33 PM D.J.J. Ring, Jr. <n...@arrl.net wrote:
> Billy, > > Please answer these questions in my yesterday's message below one by one > so we can help you. > > If you're using Mac or Linux skip the questions regarding Device Manager, > but you may still get a notification if you unplug and plug back in your > USB cable. We need to know the name the notification gives you for the > location of the cable. > > Most of the problems people have is they are using counterfeit chips in > inexpensive pirated USB converters under Windows which use Prolific chip > sets, or the cable physically isn't fitting into the radio sufficiently > enough and we can advise you what to do to make it fit. > > We need more information from you to start helping you. > > 73 > > David > N1EA > > On Wed, May 15, 2019, 04:39 D.J.J. Ring, Jr. <n...@arrl.net> wrote: > >> Billy, >> >> Tell us these things. >> >> What Operating System and Version are you using? >> Example Windows Vista, or Arch Linux, etc. >> >> Go to Device Manager if you're using Windows and see if there are any >> Warnings especially under connections and com ports. If so, what are the >> warnings? >> >> Unplug your cable into the computer from your radio. One of the com ports >> will go away in Device Manager. Now plug it in, you should get a >> notification, what com port does it say? Do you get a notification? >> >> Make sure the com port that you cable is using is the same one selected >> in CHIRP. >> >> Regards, >> >> David >> N1EA >> >> >> >> >> On Tue, May 14, 2019, 20:56 Billy Shirer <bshire...@gmail.com> wrote: >> >>> I only have 3 Comm Ports >>> >>> >>>
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
