What about the radio model isn't in the software? On Sun, Feb 17, 2019, 17:51 Jim Unroe <rock.un...@gmail.com wrote:
> > If the cable is a USB, why are you using COM3? > > Because the programming cable is manufactured with a USB-to-Serial > chip that, when used with a compatible device driver, creates a > virtual COM port. This is necessary because virtually all radios > programmed by CHIRP use serial communications and it is rare to see a > modern computer with a legacy serial port. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jim at hondabo...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com >
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
