Check Device Manager and see if the cable shows to be a Prolific. If it is, roll your driver back to 3.2.0.0. See www.miklor.com for more info on this.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator. > On Jan 12, 2019, at 19:22, D.J.J. Ring, Jr. <n...@arrl.net> wrote: > > Hi, > > I have a Wouxun red colored cable, suddenly it no longer works. I > have the Wouxun Windows programming software: Doesn't communicate > with radio. CHIRP on Win10 and Arch Linux: Same problem, radio > doesn't respond. > > It used to work, now suddenly it doesn't work! > > Is there some way I can check the USB to double jack (1/8 (3.5mm) and > 3/32 inch (2.5mm). > > I have a club member with the same cable, but it's been 20 days since > he was going to come over to test my cable by substitution. > > It's either my transceiver or my cable! Only have one hand held that > takes this cable! > > I only have a 100 MHz dual trace 'scope and a nice RadioShack 22-812 > DMM to test with. So I could capture slower pulses. Probably won't be > a good test like substitution of working cable. > > I know it's a fairly dumb question but you never know until you ask! > > 73 > David N1EA > _______________________________________________ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jard...@yahoo.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
