sqm-scripts entered the openwrt package repos for chaos calmer quite some time back.
On Thu, Feb 12, 2015 at 6:02 PM, Luis E. Garcia <[email protected]> wrote: > Sebastian , Dave, > Thanks for these instructions. > I just finished a round of 3 months testing this setup on a couple of MyNet > N750 ( AR71xx based ) in several locations. > The feedback from users is very positive and encouraging - Most of them say > that they feel the networks behave a lot snappier than before [ 7.5Mbps Up/ > 1Mbps Down]. > > All I had to do was install the 3 packages over BB 14.07 : > ip-full from the OpenWRT BB repository > and luci-app-sqm + sam-scripts from the CeroWRT repository. > > Will the later two packages ever make it to the main OpenWRT package list? > or there other packages that on the main OpenWRT distribution that can be > used to provide this functionality? ( the 2 CeroWRT packages above make > really simple to setup ). > > Regards, > Luis Garcia > > On Thu, Oct 9, 2014 at 2:59 PM, Sebastian Moeller <[email protected]> wrote: >> >> Hi Luis, >> >> >> On Oct 9, 2014, at 20:05 , Luis E. Garcia <[email protected]> wrote: >> >> > Please excuse my dumb question or just point me to the right >> > documentation. >> > But is there an easy way to run AQM/Codel on BB 14.07 ?? I'm running BB >> > on a MyNETN750 that looks like it meets the HW requirements. >> >> There probably is, I assume you need to install ip-full from the >> BB repository, and then copy >> http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages/luci-app-sqm_3-1_all.ipk >> and >> http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages/sqm-scripts_6-1_all.ipk >> onto your router and try: >> opkg install sqm-scripts_6-1_all.ipk >> and: >> opkg install luci-app-sqm_3-1_all.ipk >> >> You might need to play with opkg options, but in theory it should work… >> There probably also is a nicer way like adding a stanza similar to: >> src/gz toronto >> http://snapon.lab.bufferbloat.net/~cero2/cerowrt/wndr/3.10.50-1/packages >> to /etc/opkg.conf >> but I do not know the exact incantation of that, maybe hnyman, or Dave >> know the correct answer to this.. >> >> Best Regards >> Sebastian >> >> > >> > Regards, >> > Luis Garcia >> > >> > On Thu, Oct 9, 2014 at 12:57 PM, Sebastian Moeller <[email protected]> >> > wrote: >> > Hi Richard, >> > >> > On Oct 9, 2014, at 18:42 , Richard Smith <[email protected]> wrote: >> > >> > > On 10/06/2014 03:41 PM, Sebastian Moeller wrote: >> > > >> > >>> >> > >>> I have spare routers that I can run OpenWRT or CeroWRt on and I'm >> > >>> setup to test with netperf, netperf-wrapper on my local network ( >> > >>> desktop -> router -> laptop ) it's Gbit so I can easily saturate >> > >>> the router. >> > >> >> > >> That sounds great. I think the first test should be to run SQM under >> > >> cerowrt, so you get a feel of how things should look. I typically run >> > >> netperf-wrapper rrul tests (for ipv4 and if available for ipv6) >> > >> through cerowrt with different settings for SQM. A second step then >> > >> is to instal SQM-scripts under openwrt and check whether the same >> > >> settings produce the same results ;) >> > > >> > > Ok. I'll get my spare WNDR3700v2 up running the latest cerowrt. >> > > Should be in the next few days. I'm a bit strapped for time right now. >> > >> > No hurry, I really appreciate your help and there is no time >> > pressure (rather the other way around, I do this for a hobby, and real life >> > leaves almost no time for that ;) ) >> > >> > > >> > >> So just let me know what you are willing/ready to test and we will >> > >> take it from there okay? (I would already be a happy camper if you >> > >> could just install the current SQM-scripts on openwrt and just send >> > >> me the output of “logread” after installing and activating SQM, as >> > >> well as the output from “tc -d qdisc” before and after enabling SQM, >> > >> and finally the output of running “/etc/init.d/sqm stop ; >> > >> /etc/init.d/sqm start” on the router’s console; that hopefully works >> > >> or at least gives some indication what might be off. If you could >> > >> throw in a quick netperf-wrapper RRUL test through the router I will >> > >> be most delighted ;)) >> > > >> > > Ok. That sounds like a good starter step. First question: Where are >> > > the current SQM scripts located and what's the process for installing >> > > them? >> > > Are they packages or stuff that I scp over and manually install? >> > >> > So the repository lives on: >> > https://github.com/dtaht/ceropackages-3.10 >> > I just followed Dave’s advice and used: >> > git clone [email protected]:dtaht/ceropackages-3.3.git >> > to get my own version to play around with. Oh, SQM basically is the work >> > of Dave (who wrote the scripts doing the actual AQM&QOS work) and Toke you >> > packaged all this nicely and created the GUI for it (all I ever did was >> > shuffling the GUI around a bit). I just started hacking around the files >> > from sqm-scripts and luck-app-sqm on my cerowrt (so I could immediately do >> > some testing), so I never got around building actual packages (I assume you >> > need to be setup to build whole openwrt/cerowrt images and that is outside >> > the scope of my recreational coding), But that said if you copy the files >> > from ceropackages-3.10/net/sqm-scripts/files to the matching directory on >> > your router you should have a working sqm-script. Or just use a cerowrt >> > built as SQM is standard and potentially hnyman’s build ( >> > https://forum.openwrt.org/viewtopic.php?id=28392 ) that also includes SQM. >> > >> > Best Regards >> > Sebastian >> > >> > > >> > > I'll let you know when I've taken a stab at getting that working. >> > > >> > > > Richard A. Smith <[email protected]> >> > > > Former One Laptop per Child >> > > >> > > Just FYI: I'm slowly switching my list subs over from my previous >> > > @laptop.org address to my personal address. Just switched this one over >> > > thus the email address change. >> > > >> > > -- >> > > Richard A. Smith >> > _______________________________________________ >> > openwrt-devel mailing list >> > [email protected] >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> > >> > _______________________________________________ >> > openwrt-devel mailing list >> > [email protected] >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> > -- Dave Täht thttp://www.bufferbloat.net/projects/bloat/wiki/Upcoming_Talks _______________________________________________ Cerowrt-devel mailing list [email protected] https://lists.bufferbloat.net/listinfo/cerowrt-devel
