I have been using pie for approximately 3 weeks.

You are correct, in that the outbound speed is about 800 - 900 kb/s.

I shall try what you suggest, but do not know how to express the target of 25 ms as a configuration option.


On 27/12/13 19:15, Dave Taht wrote:

Dear fred: are you sticking with pie? I was going to suggest you try fq codel with a target 25ms on your outbound. (You are at 800kbit or so as best I recall?)

On Dec 27, 2013 11:10 AM, "Fred Stratton" <fredstrat...@imap.cc> wrote:

    I upgraded to 3.10.24-8 on 2013-12-23.

    I modified /etc/fixdaemons, adding
    /etc/init.d/sqm restart

    input the appropriate sqm settings, transcribed from aqm

    rebooted

    and the build works very well. For ADSL2+ here, it is the best so far.


    On 27/12/13 18:55, Dave Taht wrote:

    A race condition appears to have crept in...

    ---------- Forwarded message ----------
    From: "Dave Taht" <dave.t...@gmail.com <mailto:dave.t...@gmail.com>>
    Date: Dec 27, 2013 10:47 AM
    Subject: Re: [Cerowrt-devel] CeroWrt 3.10.24-8 badly bloated?
    To: "Richard E. Brown" <richb.hano...@gmail.com
    <mailto:richb.hano...@gmail.com>>
    Cc:

    Probably didn't start sqm properly

    Restart it by hand via /etc/init.d/sqm restart

    tc -s qdisc show dev ge00

    Should show htb and fq codel.

    On Dec 27, 2013 10:36 AM, "Rich Brown" <richb.hano...@gmail.com
    <mailto:richb.hano...@gmail.com>> wrote:

        So I screwed up my courage and replaced my 3.10.18-? firmware
        in my primary router with 3.10.24-8. That version had worked
        well as a secondary, so I figured, What the heck… Let’s give
        it try.

        The result was not pretty. I set my link speeds in the SQM
        page, chose the defaults for the Queue Discipline tab, and
        link layer to ATM with no additional overhead for my DSL link.

        Ping times to google are normally ~51-54 msec. But when I
        fired up speedtest.net <http://speedtest.net>, they jumped to
        1500-2500 msec. Is there something I should look at before
        reverting? Thanks.

        Rich
        _______________________________________________
        Cerowrt-devel mailing list
        Cerowrt-devel@lists.bufferbloat.net
        <mailto:Cerowrt-devel@lists.bufferbloat.net>
        https://lists.bufferbloat.net/listinfo/cerowrt-devel



    _______________________________________________
    Cerowrt-devel mailing list
    Cerowrt-devel@lists.bufferbloat.net  
<mailto:Cerowrt-devel@lists.bufferbloat.net>
    https://lists.bufferbloat.net/listinfo/cerowrt-devel


_______________________________________________
Cerowrt-devel mailing list
Cerowrt-devel@lists.bufferbloat.net
https://lists.bufferbloat.net/listinfo/cerowrt-devel

Reply via email to